Makers 2Up Pro

Makers 2Up Pro

$48.00

Description

The MakersDRIVER 2UP PRO takes building finished DIY LED fixtures to a new level by simplifying power connections and providing multiple options for dimming control.

The MakersDRIVER 2UP PRO utilizes an inexpensive 48V DC power source (sold seperately) to drive up to 28 LEDs, a fan, and an optional controller. It provides 2 dimming channels, each capable of driving 14 LEDs. The MakersDRIVER 2UP PRO incorporates user-replaceable Meanwell LDD series LED drivers. Dimming options include integrated knobs, 0-10V input, and a data interface (MakersCONTROLLER).

Included:

• MakersDRIVER 2UP PRO, plastic housing, knobs
• Stainless docking hardware for the MakersLED heatsink

Features:

MakersDRIVER 2UP PRO Photo

• Docks into the MakersLED Heatsink
• Works seamlessly with the inexpensive MakersCONTROLLER
• Drives up to 28 3v LEDs at 1000mA (45V available per channel)
• 2 channels of dimming (14 LEDs/channel)
• Manual dimming interface (via 2 knobs)
• Multiple external control options available:
– Data interface with MakersCONTROLLER lighting controller (addressable to 4 channels)
– Accepts 0-10V DC analog lighting control signal
– Neptune Apex ready
• Daisy chain multiple MakersDRIVERS for single point of control with timed dimming
• Powers one 12v Fan (no extra fan power supply needed!)
• Fan failure detection – Flashes LEDs to alert failure (if fan is detected upon start-up)
• Sockets provided for Meanwell “LDD-H” drivers allow for removal (upgrade and replacement)
• Your choice of 2 Meanwell LDD Drivers (300mA, 500mA, 700mA, 1A, or as reseller provides)
• Utilizes inexpensive 48V DC power supplies (not Included)
• Fused electrical protection
• Docks into 1ft or greater MakersLED heatsinks with space for a fan
• May co-exist with MakersDRIVER 5Up PRO when used with MakersCONTROLLER
• 90 Day warranty*

Not Included (check with your vendor!):

• 2 700mA Mean Well LDD Driver or 1000mA LDD Driver
• 1 48V Power supply
• Fan Power Source
• LEDs