Catalog Products
- Views:
-
-
-
-
-
-
48 Premium Cree XT-E/XP-G Kit
$180.85
This kit is the equivalent to a 250-400 Watt MH. With the High Noon XP-G Option you can easily replace any 400 Watt MH and have a fixture that draws less than half the power.
The Cree XP-E is the next generation of LEDs. Smaller and more efficient than the XR-E. Our kits are designed to offer maximum flexibility and savings. A ratio of one Cool White to Royal Blue is approximately 10-12K, 2 Royal Blue for every Cool White is between 12-15K 3Royal Blue for every Cool White is between 17-20K.
Our Premium Option offers you the best spectrum and brightness for the money and is our standard for referencing. The Cool Whites we select are crisp to give your corals the best coloration and spectrum for growth. The Royal Blue’s we carry are the most actinic Bin you can get your hands on and gives your corals the best colour pop. The Premium LEDs is what we recommend and what we have on our reefs.To simulate the natural lighting of the coral reef we highly recommend adding the Cree XP-G Cool White for a high noon lighting effect. We have ours on for 6 hours and growth has been outstanding. This XP-G offers a warmer spectrum along with a very nice 450nm spike which is great for growth.
Thermal Management is key our heatsinks are 8.46″ wide from Heatsink USA and with our fan kit will ensure your LEDs stay cool and last 50,000 hours.
Fans will do a lot to extend the life of your LEDs. The cooler they run the longer they last. It’s simply amazing on how airflow over a quality heatsink will lower the overall temperature. The rule of thumb is if its too hot to hold tight, its too hot for the LEDs to last.
We highly recommend dimmable drivers and a controller to give your corals a natural sunrise and sunset. A gradual rise in lighting will not shock the fish and simulate the natural lighting found on the reef. This can be accomplished best with a quality controller like an APEX or using banks of non dimmable drivers on timers
Optics are used to focus the light. Optics will significantly increase your PAR and reduce spill. Our optics are far superior to those no name Chinese ones. If you have any questions please check our LED My Tank Page. -
Carclo XP/T Ripple Wide Optics
$1.20
Carclo Optics has always been at the leading edge of optics technology since their foundation in 1936
Today Carclo Optics boasts unrivalled expertise in optical design and manufacture. Their Optics are speciffically designed to enhance the efficiency of the Cree LEDCarclo optics are our prefered optics for the BJB solderless holder.
-
-
-
-
-
-
24 CREE XT-E / XP-G Kit
$91.30
This kit is the equivalent to a 175-250 Watt MH. With the High Noon XP-G Option you can easily replace any 250 Watt MH and have a fixture that draws less than half the power.
The Cree XT-E is the next generation of LEDs. Smaller and more efficient than the XR-E. Our kits are designed to offer maximum flexibility and savings. A ratio of one Cool White to Royal Blue is approximately 10-12K, 2 Royal Blue for every Cool White is between 12-15K 3Royal Blue for every Cool White is between 17-20K.
Our Premium LEDs offer you the best spectrum and brightness for the money and is our standard for referencing. The Cool Whites we select are crisp to give your corals the best coloration and spectrum for growth. The Royal Blue’s we carry are the most actinic Bin you can get your hands on and gives your corals the best colour pop. The Premium LEDs is what we recommend and what we have on our reefs.To simulate the natural lighting of the coral reef we highly recommend adding the Cree XP-G Cool White for a high noon lighting effect. We have ours on for 6 hours and growth has been outstanding. This XP-G offers a warmer spectrum along with a very nice 450nm spike which is great for growth.
Thermal Management is key our heatsinks are 8.46″ wide from Heatsink USA and with our fan kit will ensure your LEDs stay cool and last 50,000 hours.
Fans will do a lot to extend the life of your LEDs. The cooler they run the longer they last. It’s simply amazing on how airflow over a quality heatsink will lower the overall temperature. The rule of thumb is if its too hot to hold tight, its too hot for the LEDs to last.
We highly recommend dimmable drivers and a controller to give your corals a natural sunrise and sunset. A gradual rise in lighting will not shock the fish and simulate the natural lighting found on the reef. This can be accomplished best with a quality controller like an APEX or using banks of non dimmable drivers on timers
Optics are used to focus the light. Optics will significantly increase your PAR and reduce spill. Our optics are far superior to those no name Chinese ones. If you have any questions please check our LED My Tank Page. -
-
-
-
-
-
-
36 Cree XT-E / XP-G Kit
$140.05
This kit is the equivelent to a 250 Watt MH. With the High Noon XP-G Option you can easily replace a 400 Watt MH and have a fixture that draws less than half the power.
The Cree XT-E is the next generation of LEDs. Smaller and more efficient than the XR-E. Our kits are designed to offer maximum flexibility and savings. A ratio of one Cool White to Royal Blue is approximately 10-12K, 2 Royal Blue for every Cool White is between 12-15K 3Royal Blue for every Cool White is between 17-20K.
Our Premium LEDs offer you the best spectrum and brightness for the money and is our standard for referencing. The Cool Whites we select are crisp to give your corals the best coloration and spectrum for growth. The Royal Blue’s we carry are the most actinic Bin you can get your hands on and gives your corals the best colour pop. The Premium LEDs is what we recommend and what we have on our reefs.To simulate the natural lighting of the coral reef we highly recommend adding the Cree XP-G Cool White for a high noon lighting effect. We have ours on for 6 hours and growth has been outstanding. This XP-G offers a warmer spectrum along with a very nice 450nm spike which is great for growth.
Thermal Management is key our heatsinks are 8.46″ wide from Heatsink USA and with our fan kit will ensure your LEDs stay cool and last 50,000 hours.
Fans will do a lot to extend the life of your LEDs. The cooler they run the longer they last. It’s simply amazing on how airflow over a quality heatsink will lower the overall temperature. The rule of thumb is if its too hot to hold tight, its too hot for the LEDs to last.
We highly recommend dimmable drivers and a controller to give your corals a natural sunrise and sunset. A gradual rise in lighting will not shock the fish and simulate the natural lighting found on the reef. This can be accomplished best with a quality controller like an APEX or using banks of non dimmable drivers on timers
Optics are used to focus the light. Optics will significantly increase your PAR and reduce spill. Our optics are far superior to those no name Chinese ones. If you have any questions please check our LED My Tank Page.
-
-
-
-
-
-
-
-
-
The DIY Phoenix 55 Kit
from $580.40
This is without a doubt the easiest highest quality DIY LED Light Kit on the market. We specifically chose only the best Cree LEDs and went one step further and chose only the best lots which offer superior looks. These are the same LEDs we use on our personal reef tanks. Our Cool Whites do not have yellow look.We specifically chose to drive the 15 Premium XP-G Cool White LEDs at 700mA to maximize efficiency. This LED Light Fixture is fully adjustable (whites and blues are on separate dimmable drivers), modular (you can add to it or easily swap out LEDs for a different look), extremely easy to assemble and 1/2 the cost of a Factory Fixture using Cree XP LEDs.
Optics are used to focus the light. Optics will increase your Par 1/3 – 2/3rds along with concentrating the light spread. The kit comes with only Carclo Optics which are considered the best in the industry.
This Kit was designed with only the best components and is a no kidding replacement for a 400 watt Metal Halide…Please acclimate your corals properly…Once they are acclimated they will grow like weeds with this light.
-
-
-
24 CREE XR-E Kit
$130.00
The Cree XR-E is one of the highest quality 3 watt LEDs available and is second only to the CREE XP-E LED which is more efficient than the XR-E. Our kits are designed to offer maximum flexibility and savings. A ratio of one Premium Cool White to Premium Royal Blue is approximately 10K, 2 Premium Royal Blue for every Premium Cool White is between 17-20K.
To simulate the natural lighting of the coral reef we recommend adding the Cree XP-G Cool White for a high noon lighting effect. We have ours on for 6 hours and growth has been outstanding.
Thermal Management is key our heatsinks are from Heatsink USA and with our fan kit will ensure your LEDs stay cool and last 50,000 hours.
-
The DIY Phoenix 45 Kit
from $476.90
This is without a doubt the easiest highest quality DIY LED Light Kit on the market. We specifically chose only the best Cree LEDs and went one step further and chose only the best lots which offer superior looks. These are the same LEDs we use on our personal reef tanks. We specifically chose to drive the 15 Premium XP-G Cool White LEDs at 700mA to maximize efficiency. Our Cool Whites do not have yellow look. This LED Light Fixture is fully adjustable (whites and blues are on separate dimmable drivers), modular (you can add to it or easily swap out LEDs for a different look), extremely easy to assemble and 1/2 the cost of a Factory Fixture using Cree XP LEDs.
Optics are used to focus the light. Optics will increase your Par 1/3 – 2/3rds along with concentrating the light spread. The kit comes with only Carclo Optics which are considered the best in the industry.
This Kit was designed with only the best components and is a no kidding replacement for a 250-400 watt Metal Halide…Please acclimate your corals properly…Once they are acclimated they will grow like weeds with this light.
-
-
-
-
48 Cree XR-E Kit
$270.00
The Cree XR-E is one of the highest quality 3 watt LEDs available and is second only to the CREE XP-E LED which is more efficient than the XR-E. Our kits are designed to offer maximum flexibility and savings. A ratio of one Premium Cool White to Premium Royal Blue is approximately 10K, 2 Premium Royal Blue for every Premium Cool White is between 17-20K.
To simulate the natural lighting of the coral reef we recommend adding the Cree XP-G Cool White for a high noon lighting effect. We have ours on for 6 hours and growth has been outstanding.
Thermal Management is key our heatsinks are from Heatsink USA and with our fan kit will ensure your LEDs stay cool and last 50,000 hours.
-
