24 CREE XP-E Kit
The Cree XP-E is the next generation of LEDs. Smaller and more efficient than the XR-E. Our kits are designed to offer maximum flexibility and savings. A ratio of one Cool White to Royal Blue is approximately 10K, 2 Royal Blue for every Cool White is between 17-20K. Our LED selection is specifically designed to give your corals the optimal spectrum for looks and growth
To simulate the natural lighting of the coral reef we recommend adding the Cree XP-G Cool White for a high noon lighting effect. We have ours on for 6 hours and growth has been outstanding.
Thermal Management is key our heatsinks are from Heatsink USA and with our fan kit will ensure your LEDs stay cool and last 50,000 hours.
$105.70
Description:
24 Cree 3watt XP-E LEDs
Premium: Cree XP-E R3 Cool White of at least 7K & the Royal Blue is Bin D316 which is brighter and has a tight spectrum to give you outstanding coral colour. Our Premium LEDs are labeled and are our special pick of different lots to bring out the best growth and colour in your corals. We highly recommended this choice for High End Display Tanks and those who want the best look
Regular: Cree XP-E Cool White & Royal Blue of non-specified more common Lot / Bin. These are the same high quality Cree XP-E LEDs commonly found from reputable Cree Distributors, the main difference is the Cool Whites may be a bit warmer than our Premium Cool White and the Royal Blue offer a bit less colour pop than our Premium Royal Blue. We highly recommended this choice for Standard Display and Growout/Frag Tanks
Includes:
24 LEDs
Thermal Adhesive
63/37 Solder
Wire Caps
Choice of Heatsink From HeatsinkUSA
Choice of Optional Drivers with Plugs
Choice of Optional Optics. http://reefledlights.com/shop/category/optics/
Choice of Optional fan kit…Highly recommended for optimal thermal management.
Choice of High Noon XP-G…Highly recommended for best growth. For Optics Click Here http://reefledlights.com/shop/category/optics/
Online Instructions, Build Guide & Tech Support.
Optional Accessories:
Have our Technician solder a potentiometer onto your Inventronics Driver
Splash Shields for our Drilled and Tapped Heatsinks
Hanging Kits - Non drilled and tapped heatsinks will require you to drill your own hole on the heatsink
Basilisk Expandable Sheathing - Wire Management
Fans, Wire extensions and Fan Power Supplies - Other Cooling Options
XP-E PDF:
Driver PDF: